ioLogik E2260
Active Ethernet I/O with 6 RTD inputs and 4 digital outputs
 |
 Datasheet Manual Drivers & Software |
 Larger image |
|
|
|
Features and Benefits
IntroductionBring intelligence to temperature measurement The ioLogik E2260 brings intelligence to temperature sensors. It comes equipped with virtual channels that are designed to calculate the average value of each channel, and the difference between two channels. And it does all this without a controller or PC. Compatible with popular RTD temperature sensors The ioLogik E2260 offers PT100, PT1000, JPT, and Ni sensor types and a resistor of up to 2.2 Kohms, and supports using your own resistance sensor, such as PTC or NTC for your HVAC applications. More info >> |
| • LAN: | |
| Ethernet | 10/100Mbps, RJ45 |
| Protection | 1.5KV magnetic isolation |
| Protocols | Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP(MIB for I/O and Network), HTTP, SNTP |
| • Serial: | |
| Interface | RS-485-2w: Data+, Data-, GND |
| Serial Line Protection | 15KV ESD for all signals |
| • Serial Communication Parameters: | |
| Data Bits | 8 |
| Stop Bits | 1 |
| Parity | None |
| Flow Control | None |
| Protocols | Modbus/RTU |
| Speed | 1200 to 115200 bps |
| • RTD: | |
| Channels | 6, RTD channels |
| Sampling Rate | 12 samples/sec (all channels) |
| Resolution | 0.1˚C or 0.1 ohms |
| Accuracy | ± 0.1% FSR @ 25˚C ±0.3% FSR @ -10 and 60˚C |
| Input Impedence | 625K ohms(min.) |
| Input Type | Pt, JPt, Ni, RTD sensors, resister |
| • Digital Output: | |
| Channels | 4, sink, 45 VDC, 200 mA |
| Optical Isolation Protection | 3K VDC or 2K Vrms |
| Output Frequency | 100 Hz |
| Over-voltage Protection | 45 VDC |
| Over-current Limit | 750 mA |
| Over-temperature Shutdown | 175˚C |
| • Physical Characteristics: | |
| Wiring | I/O cable max. 14AWG |
| • Environmental Limits: | |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Power Requirements: | |
| Input Voltage | 24 VDC nominal, 12 to 48 VDC |
| DO Power | 24 VDC nominal, up to 30 VDC |
| • Agency Approvals: | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | IEC 61000-4, IEC 61000-6 |
| Safety | UL508 |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
| • Warranty: | |
| Warranty Period | 2 years |
| Details | See www.moxa.com/warranty |
Products
