Location: Home >> Products >> Industrial Ethernet >> Remote I/O >> Active Ethernet I/O >> ioLogik E2214

ioLogik E2214

Active Ethernet I/O with 6 digital inputs and 6 relay outputs

Datasheet
Manual
Drivers & Software
Larger image
  


Features
Specifications
Ordering Information

Features and Benefits


  • 6 DIs supporting PNP, NPN, and Dry contact
  • 6 Form A relay output (Normal Open)
  • Relay specification: 5A/250 VAC, 5A/30 VDC
  • Instant event messaging by TCP/UDP/e-mail/SNMP trap
  • DI and Relay counter saving when power off
  • PC-based configuration utility and web console
  • Power On default relay status setting with sequence
  • Easy-to-use Click&Go™ Logic for local output control
  • Windows/WinCE VB/VC and Linux C API
  • I/O control over Modbus/TCP and SNMP protocol

Introduction


Remote Ethernet Relay Control 
The ioLogik E2214 is a stand-alone Active Ethernet I/O product with 6 digital inputs and 6 relay outputs. The DIN-Rail mountable E2214 can be connected to digital switches, alarm lights, buzzers, and warning sirens over Ethernet and IP-based networks. The ioLogik E2214 also records the built-in relay output usage counter. Even when a sudden power failure is encountered, the ioLogik E2214 will still be able to record the relay output usage counter in its internal storage before the power is completely shut down.


More info >>

•  LAN:
Ethernet10/100Mbps, RJ45
Protection1.5 KV magnetic isolation
ProtocolsModbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, SNTP


•  Serial:
InterfaceRS-485-2w: Data+, Data-, GND
Serial Line Protection15 KV ESD for all signals


•  Serial Communication Parameters:
Data Bits8
Stop Bits1
ParityNone
Flow ControlNone
ProtocolsModbus/RTU
Speed1200 to 115200 bps


•  Digital Input:
Channels6 digital inputs
Sensor TypeNPN, PNP, and Dry contact
I/O ModeDI or Event Counter (up to 900 Hz)
Dry ContactLogic 0: short to GND,
Logic 1: open
Wet ContactLogic 0: 0 to 3 VDC,
Logic 1: 10 to 30 VDC
Common Type6 points/2 COM
Isolation2K VDC or 3K Vrms
Counter Frequency900 Hz
Digital Filtering Time Interval10 ms
Over-voltage Protection36 VDC
Relay Counter SavingYes


•  Digital Output:
Channels6 Form A (N.O.) relay outputs, 5A
Contact Rating5A @ 30 VDC, 5A @ 240 VAC, 5A @ 110 VAC
Inductance Load2A
Resistance Load5A
Breakdown Voltage500 VAC
Relay On/Off Time10 ms, 5 ms (Max.)
Initial Insulation Resistance1G min. @ 500 VDC
Expected Life100,000 times (Typical)
Initial Contact Resistance30m ohms (Max.)
Pulse Output20 operation times per minutes at rated load
Isolation3K VDC or 2K Vrms


•  Physical Characteristics:
WiringI/O cable max. 14AWG


•  Environmental Limits:
Operating Temperature-10 to 60°C (14 to 140°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)


•  Power Requirements:
Power Input24 VDC nominal, 12 to 48 VDC
DO Power24 VDC nominal, up to 30 VDC


•  Agency Approvals:
EMIFCC Part 15, CISPR (EN55022) class A
EMSIEC 61000-4, IEC 61000-6
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6


•  Warranty:
Warranty Period2 years
DetailsSee www.moxa.com/warranty



To request a quote, indicate which items you are interested in below and click "Get a Quote".
Active Ethernet I/O
 Model No. Descritpion

ioLogik E2214

Active Ethernet I/O with 6 digital inputs and 6 relay outputs

LDP1602

LCD module with 16 x 2 text display and 5 buttons