ioLogik E2212
Active Ethernet I/O with 8 digital inputs, 8 digital outputs, and 4 configurable DIO
 |
 Datasheet Manual Drivers & Software |
 Larger image |
|
|
|
Features and Benefits
IntroductionFlexible digital input/output configuration The ioLogik E2212 provides system integrators with the flexibility to handle various field demands with channels that can be configured by software for input or output operation. You can configure the I/O channels to suit your needs, for combinations such as 12 inputs/8 outputs, 8 inputs/12 outputs, or 10 inputs/10 outputs. Single Ethernet DIO that Accepts 3 Types of Sensors Unlike traditional Ethernet I/O products, the ioLogik E2212 can connect to dry contact, PNP, and NPN sensors at the same time. You can choose the sensor type based on your wiring approach. More info >> |
| • LAN: | |
| Ethernet | 10/100Mbps, RJ45 |
| Protection | 1.5KV magnetic isolation |
| Protocols | Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP(MIB for I/O and Network), HTTP, SNTP |
| • Serial: | |
| Interface | RS-485-2w: Data+, Data-, GND |
| Serial Line Protection | 15KV ESD for all signals |
| • Serial Communication Parameters: | |
| Data Bits | 8 |
| Stop Bits | 1 |
| Parity | None |
| Flow Control | None |
| Protocols | Modbus/RTU |
| Speed | 1200 to 115200 bps |
| • Digital Input: | |
| Channels | 8 fixed points |
| Sensor Type | 2 6-point groups for NPN/PNP type |
| I/O Mode | DI or Event Counter (up to 900Hz) |
| Dry Contact | Logic 0: short to GND Logic 1: open |
| Wet Contact | Logic 0: 0 to 3 VDC Logic 1: 10 to 30 VDC |
| Common Type | 6 points per COM |
| Isolation | 3K VDC or 2K Vrms |
| Low Speed Counter/Frequency | 900 Hz, power off storage |
| Over-voltage Protection | 36 VDC |
| Poweroff Counter Memory | 48 Bytes |
| • Digital Output: | |
| Channels | 8 fixed points sink, 45 VDC, 200 mA |
| Magnetic Isolation | 2K Vrms or 3K VDC |
| Pulse Wave Width | 10 ms/100 Hz |
| Over-voltage Protection | 45 VDC |
| Over-current Limit | 400 mA (typical) |
| Over-temperature Shutdown | 175°C (min.) |
| • DI/DO Configurable Channels: | |
| Channels | 4 |
| I/O Mode | DI or Event Counter (Up to 900 Hz) DO or Pulse Output (Up to 100 Hz) |
| • Physical Characteristics: | |
| Wiring | I/O cable max. 14AWG |
| • Environmental Limits: | |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Power Requirements: | |
| Power Input | 24 VDC nominal, 12 to 48 VDC |
| DO Power | 24 VDC nominal, up to 30 VDC |
| • Agency Approvals: | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | IEC 61000-4, IEC 61000-6 |
| Safety | UL508 |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
| • Warranty: | |
| Warranty Period | 2 years |
| Details | See www.moxa.com/warranty |
Products
