Location: Home >> Products >> Industrial Ethernet >> Remote I/O >> Active Ethernet I/O >> ioLogik E2242

ioLogik E2242

Active Ethernet I/O with 4 analog inputs and 12 configurable DIO

Datasheet
Manual
Drivers & Software
Larger image
  


Features
Specifications
Ordering Information

Features and Benefits


  • 4 fixed differential analog input channels
  • 12 configurable digital input/output channels
  • Instant event messaging by TCP, UDP, e-mail, SNMP Trap
  • PC-based configuration utility and web console
  • Easy-to-use Click&Go™ Logic for local output control
  • I/O control over Modbus/TCP and SNMP protocol
  • NIST traceable calibration

Introduction

Better I/O matrix for monitoring 
Moxa's ioLogik E2242 is tailor made for use with remote monitoring and alarm systems. This Active Ethernet I/O product provides 4 analog inputs and 12 configurable DIOs in the same product. The 1:3 ratio of analog to digital IOs is perfectly adapted for water tank monitoring and environmental monitoring applications, in which 1 analog input is used to trigger 3 digital outputs as High-High, High, and Low alarms. Moxa's ioLogik E2242 lets you set up your monitoring system without the need for a local PC or RTU.


More info >>

•  LAN:
Ethernet10/100Mbps, RJ45
Protection1.5KV magnetic isolation
ProtocolsModbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP(MIB for I/O and Network), HTTP, SNTP


•  Serial:
InterfaceRS-485-2w: Data+, Data-, GND
Serial Line Protection15KV ESD for all signals


•  Serial Communication Parameters:
Data Bits8
Stop Bits1
ParityNone
Flow ControlNone
ProtocolsModbus/RTU
Speed1200 to 115200 bps


•  Digital Input:
Sensor TypeNPN, PNP
I/O ModeDI or event counter (up to 900 Hz)
Dry ContactLogic 0: short to GND
Logic 0: Open
Wet ContactLogic 0: 0 to 3 VDC
Logic 1: 10 to 30 VDC
Common Type6 points per COM
Power Off Storage for Counter ModeYes


•  Digital Output:
Sensor TypeSink, 36 VDC, 200 mA
Pulse Wave Width10 ms /100 Hz


•  Configurable Digital Input/Output Channels:
Channels12 points


•  Analog Input:
Resolution16-bit
Input Range±150 mV, 0 to 150 mV, ±500 mV, 0 to 500 mV, ±5 V, 0 to 5 V, ±10 V, 0 to 10 V, 0 to 20 mA, 4 to 20 mA
Accuracy±0.1% FSR @ 25˚C, ±0.3% FSR @ -10 and 60˚C
Sampling Rate (all channels)100 samples/sec
Input Impedence200K ohms (min.)
Built-in Resistor for Current Input102 ohms
Channels4, differential input


•  Physical Characteristics:
WiringI/O cable max. 14AWG


•  Environmental Limits:
Operating Temperature-10 to 60°C (14 to 140°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)


•  Power Requirements:
Power Input24 VDC nominal, 12 to 48 VDC
DO Power24 VDC nominal, up to 30 VDC


•  Agency Approvals:
EMIFCC Part 15, CISPR (EN55022) class A
EMSIEC 61000-4, IEC 61000-6
SafetyUL508
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6


•  Warranty:
DetailsSee www.moxa.com/warranty



To request a quote, indicate which items you are interested in below and click "Get a Quote".
Active Ethernet I/O
 Model No. Descritpion

LDP1602

LCD module with 16 x 2 text display and 5 buttons

ioLogik E2242

Active Ethernet I/O with 4 analog inputs and 12 configurable DIOs