Location: Home >> Products >> Device Connectivity >> Device Servers >> Embedded Device Servers >> WE-2100T

WE-2100T

Wireless LAN embedded serial device servers

Datasheet
Manual
Drivers & Software
Larger image
 


Features
Specifications
Ordering Information

Features and Benefits


  • Connects serial devices to IEEE 802.11a/b/g networks
  • Choice of operation modes: Real COM, TCP Server, TCP Client, UDP, and RFC2217
  • Windows (including Vista!) real COM and Linux fixed TTY drivers provided
  • Wireless security with WEP, WPA, and WPA2
  • Select Any Baudrate between 50 bps and 921.6 Kbps
  • 9 programmable digital I/O channels
  • SSL/SSH encryption for configuration
  • Compact size and easily mounted housing

Overview

The WE-2100T is a secure and compact embedded wireless module for connecting serial devices to access points in infrastructure mode, or to other WE-2100T's in ad-hoc mode. When using the WE-2100T, complex RF know-how is not needed to connect serial devices to a wireless Ethernet network. Encryption for secure data transfer is supported, along with the 802.11a/b/g radio specifications.


Operation Modes for Embedded Applications

The WE-2100T supports Real COM, TCP Server, TCP Client, UDP, and RFC 2217 operation modes, which are designed to fulfill the requirements of embedded module applications. Complete driver support for Real COM mode is included and easy to install.


On-site Configuration with Serial Command Mode

  • Easy on-site configuration of network settings
  • Simple command frame format
  • Comprehensive command set for serial and network configuration
  • Easily switch between software and hardware triggers
  • Software reset


More info >>

• Form Factor
TypeSmall metal housing that encloses advanced ARM-based 32-bit processor; supports both wireless and Ethernet connections
Dimensions54 x 40 x 13.3 mm (2.13 x 1.57 x 0.52 in)


• Automatic Network Selection
Wireless or EthernetThe WE-2100T will activate the Ethernet connection if detected at boot-up. If an Ethernet connection is not detected, the WE-2100T will choose wireless as the communication interface. Which interface to use can also be configured with the WE-2100T's configuration utilities.


• LAN Interface
Number of Ports1
Speed10/100 Mbps, Auto MDI/MDIX
Connector(s)44-pin dual-in-line
Magnetic Isolation Protection1.5 KV built-in


• WLAN Interface
Standard ComplianceIEEE 802.11a/b/g
Network ModeInfrastructure mode (a/b/g), Ad-Hoc mode (b/g)
Spread Spectrum TechnologyDSSS, CCK, OFDM
Transmit Power5.15 to 5.25 GHz: 15 dBm @ 6 Mbps; 12 dBm @ 54 Mbps 5.725 to 5.825 GHz: 15 dBm @ 6 Mbps; 12 dBm @ 54 Mbps
2.412 to 2.483 GHz: 17 dBm @ 6 Mbps; 15 dBm @ 54 Mbps
2.412 to 2.472 GHz: 18 dBm @ 1 to 11 Mbps
Receive Sensitivity5.15 to 5.25 GHz: 6 Mbps @ -90 dBm; 54 Mbps @ -72 dBm
5.725 to 5.825 GHz: 6 Mbps @ -89 dBm; 54 Mbps @ -72 dBm
2.412 to 2.483 GHz: 6 Mbps @ -90 dBm; 54 Mbps @ -73 dBm
2.412 to 2.472 GHz: 11 Mbps @ -87 dBm; 1 Mbps @ -94 dBm
Transmission Rate802.11a: 54 Mbps
802.11b: 11 Mbps
802.11g: 54 Mbps
Transmission DistanceUp to 100 meters (in open areas)
Wireless SecurityAES, WEP 64/128-bit, WPA, WPA2, 802.11i
802.11i AuthenticationTLS, PEAP/GTC, PEAP/MD5, PEAP/MSCHAPv2, TTLS/PAP, TTLS/CHAP, TTLS/MSCHAP, TTLS/MSCHAPv2, TTLS/EAP-MSCHAPv2, TTLS/EAP-GTC, TTLS/EAP-MD5, LEAP
ChannelsNorth America: CH1 to CH11, 5150-5825 MHz
Europe: CH1 to CH13, 5150-5875 MHz
Japan: CH1 to CH14, 5150-5350 MHz
Antenna ConnectorReverse SMA
Antenna Gain2 DBi


• Serial Interface
Serial StandardsPort 1: TTL
Port 2: TTL console port
Number of Ports1


• Serial Signals
TTL (Port 1)TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
TTL (Port 2)TxD, RxD, GND


• Serial Communication Parameters
Data Bits5, 6, 7, 8
Stop Bits1, 1.5, 2
ParityNone, Even, Odd, Space, Mark
Flow ControlRTS/CTS, XON/XOFF, DTR/DSR
Baudrate50 bps to 921.6 Kbps (supports Any Baudrate in this range)


• Software
Network ProtocolsICMP, IP, TCP, UDP, DHCP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, SSH, HTTPS
Driver SupportWindows COM driver (for Windows 98, ME, NT, 2000, XP, 2003, XP x64, 2003 x64, Vista), Linux Real TTY driver, SCO Unix, SCO OpenServer 5, UnixWare 7, UnixWare 2.1.x, SVR4.2, QNX
Configuration OptionsWeb Console, Serial Console, Telnet Console, Windows Utility (for Windows 98, ME, 2000, XP, 2003, Vista), Serial command mode (configured through the data port)
Supported Operating ModesReal COM, TCP Server, TCP Client, UDP, RFC2217


• Power Requirements
Input Voltage3.3 VDC (±5%)
Power Consumption921.6 Kbps (full speed): 540 mA
Idle: 190 mA
Ethernet mode: 670 mA
Inrush current: 2100 mA


• Regulatory Approvals
SafetyEN60950, CUL TÜV
EMCCE EN55022 Class A, FCC Part 15 Subpart B Class A
WirelessCE ETSI EN 301 489-17
CE ETSI EN 301 489-1
FCC Part 15, Subpart B, Class A
FCC Part 17, Subpart B, Class A


• Environmental Limits
Operating Temperature0 to 55°C (32 to 131°F)
Operating Humidity5 to 95% RH
Storage Temperature-20 to 70°C (-4 to 158°F)


• Surface Temperature
Top Panel43.0°C, when air temp = 25°C
55.0°C, when air temp = 55°C
(at full baudrate of 921.6 Kbps)
Bottom Panel44.5°C, when air temp = 25°C
67.0°C, when air temp = 55°C
(at full baudrate of 921.6 Kbps)


• Warranty
Warranty Period5 years
DetailsSee www.moxa.com/warranty



To request a quote, indicate which items you are interested in below and click "Get a Quote".
Serial to Ethernet
 Model No. Description

WE-2100T

1-port wireless module supporting IEEE 802.11a/b/g

WE-2100T-ST

Starter Kit for the WE-2100T