VPort D351
1-channel MJPEG/MPEG4 industrial video decoder
 |
 Datasheet Manual Drivers & Software |
 Larger image |
|
|
|
Features and Benefits
IntroductionThe VPort D351 is a 1-channel video decoder for decoding MPEG4/MJPEG video streams from VPort series video encoders (not include VPort 2110, VPort 2140, VPort 2310, VPort 2141, and VPort 3310)and VPort IP cameras back to analog video signals. The analog video signal can be sent to legacy CCTV devices, such as monitors,multiplexers, and matrix switches, which can be used as originally intended as part of CCTV systems. In addition, bi-directional audio enables ready-to-use voice over IP communication between the video encoder and decoder. Monitoring cameras that are part of large CCTV systems is easy with the VPort D351, which can be set up to switch between different video sources either manually or automatically within a given time interval. Up to 64 video sources can be included in the list. In addition, the 2DIs located on the top panel of the VPort D351 can be used to create 2 control buttons for up and down video source selection. More info >> |
| • Video: | |
| Video Inputs | Video streams from VPort series video encoders and VPort IP cameras over TCP/IP networks (not including VPort 2110, VPort 2140, VPort 2310, VPort 2141, and VPort 3310) |
| Video Outputs | 1, BNC connector, NTSC or PAL |
| Video Viewing | • Max. 30/25 FPS (NTSC/PAL) can be decoded • OSD (on-screen display) with video source, video source IP, date/time, and customized information |
| Video Decoding | MPEG4, MJPEG (Auto detecting) |
| Video Source | Up to 64, selected manually by web server or digital inputs, or selected automatically by scanning within a set time interval |
| Resolution | Max. 540 TVL line |
| Video Resolution and FPS (frames per second) |
| • Audio: | |
| Audio Input | 1 Line-in port; 1 Mic-in port |
| Audio Output | 1 Line-out port |
| Audio Decoding | PCM, Mono |
| Audio Encoding | PCM, Mono |
| • Network: | |
| Protocols | TCP, UDP, HTTP, SMTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, and SNMPv1/v2c/v3 |
| Ethernet | 1 RJ45 port, 10/100BaseT(X) auto negotiation |
| • Serial: | |
| PTZ Port | 1, RS-232/422/485 terminal block connector, max. 115.2 Kbps baudrate |
| Console Port | 1, RS-232 RJ45 port |
| • GPIO: | |
| Digital Inputs | 2, max. 8 mA “High”: +13V to +30V “Low”: -30V to +3V |
| Relay Outputs | 2 (max. 24 VDC @ 1A) |
| • LED Indicators: | |
| STAT | Indicates if system booted up properly or not |
| PWR1 | Power 1 |
| PWR2 | Power 2 |
| Fault | Can be configured to correspond to system alarm, power failure, video loss, or disconnected network |
| • Physical Characteristics: | |
| Weight | 910 g |
| Dimensions | 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in.) |
| Installation | DIN-Rail mounting, wall mounting (optional kit) |
| • Power Requirements: | |
| Input Voltage | 2 12/24 VDC and 24 VAC power inputs for redundancy |
| • Environmental Limits: | |
| Operating Temperature | 0 to 60°C (32 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Agency Approvals: | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | EN61000-4-2 (ESD), level 2 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 2 EN61000-4-12 (Oscillatory wave immunity), level 3 |
| Safety | UL508 |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
| • Warranty: | |
| Warranty Period | 5 years |
| Details | see www.moxa.com/warranty for details |
| • Others | |
| Alarm Features | Automatically switch to the video source once an event is triggered |
| Pan/Tilt/Zoom | Transparent PTZ camera control with legacy PTZ controller through the RS-232/422/485 port |
| Security | • User level password protection • IP address fi ltering |
