VPort 251
Full motion, 1-channel MJPEG/MPEG4 video encoder
 |
 Datasheet Manual Drivers & Software |
 Larger image |
|
|
|
Features and Benefits
IntroductionThe VPort 251 is a high performance, 1-channel video encoder with compact form factor that is suitable for installation in a variety of locations, including outdoor camera cabinets. To make installation easier, the VPort 251 supports both panel mounting and DIN-Rail mounting (with DK-35A accessory), and 1 loop-through power output for powering an analog camera. In addition, the VPort 251 provides up to full D1, full frame rate video performance (NTSC: 720 x 480 up to 30 FPS; PAL: 720 x 576 up to 25 FPS) and supports both MJPEG or MPEG4, making it especially well suited for use with distributed video surveillance systems. A 2-way audio function is also provided for the convenience of real-time communication between system administrators located at the central site, and engineers in the field. More info >> |
| • Video: | |
| Video Compression | MJPEG, MPEG4 (ISO/IEC 14496-2) |
| Video Inputs | 1, BNC connector (1.0 Vpp, 75 ohms) |
| NTSC/PAL | Auto-sensing or manual |
| Video Viewing | • Adjustable image size and quality • Timestamp and text overlay |
| • Video Resolution and FPS (frames per second) |
 |
| • Audio: | |
| Audio Input | 1 Line-in or Mic-in, 3.5 mm phone jack |
| Audio Output | 1 Line-out, 3.5 mm phone jack |
| • Network: | |
| Protocols | TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3,QoS, DDNS, SNMPv1/v2c/v3 |
| Ethernet | 1 RJ45 port, 10/100BaseT(X) auto negotiation |
| • Serial: | |
| PTZ Port | 1, RS-232/422/485 terminal block connector, maximum baudrate of 115.2 Kbps |
| Console Port | 1 RS-232 RJ45 port |
| • GPIO: | |
| Digital Inputs | 1, max. 8 mA “High”: +13V to +30V “Low”: -30V to +3V |
| Relay Outputs | 1 (max. 24 VDC @ 1A) |
| • LED Indicators: | |
| STAT | Indicates if the system boots properly or not |
| VIDEO | Video input signal active |
| PTZ | PTZ control signal active |
| • Physical Characteristics: | |
| Weight | 850 g |
| Dimensions | 88.2 x 106 x 50 mm (3.47 x 4.17 x 1.97 in.) |
| Installation | Wall (Panel) mounting, DIN-Rail mounting (optional kit) |
| • Power Requirements: | |
| Output Power | 2-pin terminal block connector for loop-through from power input |
| Power Consumption | Max. 7.5W |
| Power Input | 12/24 VDC or 24 VAC power input |
| • Environmental Limits: | |
| Operating Temperature | 0 to 60°C (32 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5% to 95% (non-condensing) |
| • Agency Approvals: | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | EN61000-4-2 (ESD), level 2 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-12 (Oscillatory wave immunity), level 3 |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
| • Warranty: | |
| Warranty Period | 5 years |
| Details | see www.moxa.com/warranty for details |
| • Others | |
| Alarm Features | • Video motion detection with sensitivity tuning • Video loss alarm • Daily repeat timing schedule • JPEG snapshots for pre/trigger/post alarm images • HTTP Event Servers for setting customized alarm actions • Automatic transfer of stored images via email or FTP with event-triggered actions |
| Pan/Tilt/Zoom | • PTZ camera control through RS-232/422/485 port • PTZ control functions: PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 25 positions) • 10 custom commands for customized PTZ control • Supported devices and protocols: Pelco D, P protocol, Dynacolor DynaDOME, Custom Camera • PTZ driver upload supported • Supports transparent PTZ control for controlling the PTZ camera with legacy PTZ control panel or keyboard connected with a PC or VPort decoder |
| Security | • User level password protection • IP address fi ltering |
| System Requirements | • Pentium 4, 2.4 GHz or above • 512 MB memory or above • Windows XP/2000 with SP2 or above • Internet Explorer 6.x or above • DirectX 9.0c or above |
| Software Bundled Free | • SoftDVR™ Lite: 1 to 4-ch IP surveillance software for viewing and recording • VPort SDK PLUS: Includes CGI commands and ActiveX Control for customized application or system integration for third-party developer (Please go to Moxa's website to download the latest SDK version.) |
