VPort 25
Vandal-proof day-and-night fixed dome IP camera for outdoors
 |
 Datasheet Manual |
 Larger image |
|
|
|
Features and Benefits
IntroductionThe VPort 25 is a vandal-proof, IP66-rated, fixed dome IP camera for use in harsh, outdoor environments. With maximum resolution of 520 TVL and day-and-night CCD camera lens, the VPort 25 is especially well-suited for high performance video surveillance applications. To meet the outdoor environment requirements, the VPort 25 is IP66-rated to protect it against dust and rain. In addition, the vandal-proof form factor design prevents damage from unexpected external forces, and the case-open sensor sends an alarm message when the VPort 25's outer case is opened. Heater and fan not required, supports direct-wired power input and PoE for power redundancy The VPort 25's no-heater/fan-less embedded system provides greater reliability for outdoor use. In addition, the camera comes with redundant power inputs: (1) direct power connection (12/24 VDC and 24 VAC) and (2) PoE (IEEE 802.3af) power input. High performance video, with full motion MJPEG/MPEG4 video stream The VPort 25 uses the ASIC compression chip, which provides video performance up to full D1 (720 x 480) @ 30 FPS. To meet a wider range of customer requirements, the VPort 25 supports dual-codecs, including the MJPEG and MPEG4 algorithms. More info >> |
| • Camera | |
| Sensor | 1/3" Sony Super HAD or 1/3" Sony ExView |
| Lens | Wide-end: F1.4, diagonal 115.4°, horizontal 90.3° Tele-end: F2.4, diagonal 39.8°, horizontal 31.9° Focal length: F= 3.7-12 mm |
| Modulation | NTSC or PAL |
| Camera Angle | Pan: ±180°; tilt: ±85°, rotation: ±170° (camera angles controlled manually) |
| Illumination | Color: 0.2 Lux at F1.2 Black and white: 0.03 Lux at F1.2 |
| Synchronization | Internal |
| Gamma Correction | 0.45 |
| White Balance | Auto tracking white balance |
| Electronic Shutter Speed | Auto: 1/60 (50) second to 1/100,000 second |
| S/N Ratio | More than 50 dB (AGC off) |
| AGC Control | On/Off |
| Flickerless Control | On/Off |
| Backlight Compensation | On/Off |
| Mirror | On/Off |
| Auto Exposure, Auto Iris | On: Auto exposure Off: Auto iris |
| Horizontal Resolution | 420TVL/520TVL |
| Effective Pixels | NTSC: 510 x 492 (middle resolution) / 768 x 494 (high resolution) PAL: 500 x 582 (middle resolution) / 752 x 582 (high resolution) |
| • Video Resolution and FPS (frames per second) |
 |
| • Video: | |
| Video Compression | MJPEG or MPEG4 (ISO/IEC 14496-2) |
| Video Outputs | Via Ethernet port or BNC connector (1.0 Vpp, 75 ohms) |
| Video Viewing | • Adjustable image size and quality • Timestamp and text overlay |
| • Audio: | |
| Audio Input | 1 Line-in or MIC-in with 2-pin terminal block connector |
| Audio Output | 1 Line-out with 2-pin terminal block connector |
| • Network: | |
| Protocols | TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, SNMPv1/v2c/v3, DDNS |
| Ethernet | 1 10/100BaseT(X) auto negotiating RJ45 port |
| • GPIO: | |
| Digital Inputs | 1, max. 8 mA "High": +13V to +30V "Low": -30V to +3V |
| Relay Outputs | 1, max. 24 VDC @ 1A |
| • LED Indicators: | |
| STAT | Indicates if the system booted properly |
| Network | 1 LED for 10 Mbps, 1 LED for 100 Mbps |
| Power | Power On/Off |
| DIP Switches | To turn the LED light On/Off |
| • Power Requirements | |
| Input Voltage | Redundant power inputs • 12/24 VDC or 24 VAC with 2-pin terminal block connector • Power-over-Ethernet (IEEE 802.3af) |
| • Physical Characteristics | |
| Housing | IP66-rated for rain and dust protection, vandal-proof supports |
| Weight | 1100 g |
| Dimensions | 142 x 118.9 mm (5.60 x 4.68 in) |
| Installation | Surface mounting, wall mounting |
| • Environmental Limits | |
| Operating Temperature | -40 to 50°C (-40 to 122°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Regulatory Approvals | |
| Safety | UL508 (Pending) |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | EN61000-4-2 (ESD), level 2 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-12 (Oscillatory wave immunity), level 3 |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
| • Warranty | |
| Warranty Period | 1 year |
| Details | See www.moxa.com/warranty |
| • Others | |
| Alarm Features | •Video motion detection with sensitivity tuning •Video loss alarm •Built-in case-open sensor alarm •Daily repeat timing schedule •JPEG snapshots for pre/trigger/post alarm images •HTTP event servers for setting customized alarm actions |
| Security | •User level password protection •IP address filtering |
| System Requirements | •Pentium 4, 2.4 GHz or above •512 MB memory or above •Windows XP/2000 with SP2 or above •Internet Explorer 6.x or above •DirectX 9.0c or above |
| Software Bundled Free | •SoftDVR™ Lite: 1 to 4-ch IP surveillance software for viewing and recording •VPort SDK PLUS: Includes CGI commands and ActiveX Control for customized application or system integration for third-party developer (Please go to Moxa's website to download the latest SDK version.) |
