Static routing, RIP V1/V2 to move data and information across networks
Turbo Ring and RSTP/STP (IEEE 802.1W/D)
IGMP Snooping and GMRP for fi ltering multicast traffic from industrial Ethernet protocols
IEEE 802.1Q VLAN, and GVRP protocol to ease network planning
QoS-IEEE802.1p/1Q and TOS/DiffServ to increase determinism
802.3ad, LACP for optimum bandwidth utilization
IEEE 802.1X and https/SSL to enhance network security
SNMP V1/V2c/V3 for different levels of network management
ABC-01 for system configuration backup
RMON for efficient network monitoring and proactive capability
Bandwidth management prevents unpredictable network status with "Lock port" to restrict access to authorized MAC addresses
Port mirroring for online debugging
Automatic warning by exception through email, relay output
Automatic recovery of connected device's IP addresses
Line-swap fast recovery
Configurable by Web browser, Telnet/Serial console, Windows utility, and ABC-01
Introduction
The PowerTrans PT-7828 is a high performance layer 3 switch that supports IP routing protocols, including static routing and RIP V1/V2,which facilitate the deployment of mission-critical applications across networks. The PT-7828 is also designed to meet the demands of power substation automation systems (IEC 61850-3, IEEE1613), traffic control systems (NEMA TS2), and railway applications (EN50121-4).
The PT-7828's Gigabit and fast Ethernet backbone, redundant ring, and24/48 VDC or 110/220 VDC/VAC power supplies increase the reliability of your communications and save on cabling/wiring costs. The modular design of the PT-7828 makes network planning easy, and allows greater flexibility by letting you install up to 4 Gigabit ports and 24 fast Ethernet ports. Optional front or rear wiring makes the PT-7828 suitable for a variety of applications.
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, 10/100BaseT(X) or 10/100/1000BaseT(X) IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACP
10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Fiber Port(s)
100BaseFX ports (SC/ST connector)
Optical Fiber
PM-7200-4G/2G series Gigabit Ethernet Interface Modules
* The PM-7200-2G/4G series gigabit Ethernet modules support 4 or 2 SFP slots. Please select the SFP-1G series gigabit Ethernet modules that you need for your own application.
• Interface:
RJ45 Ports
10/100/1000BaseT(X) auto negotiation speed, and auto MDI/ MDI-X connection