IGMP Snooping and GMRP for filtering multicast traffic from industrial Ethernet protocols
IEEE 802.1Q VLAN and GVRP protocol to ease network planning
QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism
802.3ad, LACP for optimum bandwidth utilization
IEEE 802.1X, HTTPS, and SSH to enhance network security
SNMPv1/v2c/v3 for different levels of network management
RMON for efficient network monitoring and proactive capability
ABC-01 for system configuration backup
Bandwidth management prevents unpredictable network status
Lock port for only authorized MAC address access
Port mirroring for online debugging
Automatic warning by exception through email, relay output
Automatic recovery of connected device's IP addresses
Line-swap fast recovery
Configurable by Web browser, Telnet/Serial console, Windows utility, and ABC-01
Introduction
The PowerTrans PT-7728 is designed to meet the demands of power substation automation systems (IEC 61850-3, IEEE1613), traffic control systems (NEMA TS2), and railway applications (EN50121-4). The PT-7728's Gigabit and fast Ethernet backbone, redundant ring, and 24/48 VDC or 110/220 VDC/VAC power supplies increase the reliability of your communications and save on cabling/wiring costs.
The modular design of the PT-7728 also makes network planning easy, and allows greater flexibility by letting you install up to 4 Gigabit ports and 24 fast Ethernet ports. The optional front or rear wiring makes the PT-7728 suitable for a variety of industrial applications.
This product supports expansion modules. Click here for info on available modules.
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACP
10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Fiber Port(s)
100BaseFX ports (SC/ST connector)
PM-7200-4G/2G series Gigabit Ethernet Interface Modules
•
* The PM-7200-2G/4G series gigabit Ethernet modules support 4 or 2 SFP slots. Please select the SFP-1G series gigabit Ethernet modules that you need for your own application.
• Interface:
RJ45 Ports
10/100/1000BaseT(X) auto negotiation speed, and auto MDI/ MDI-X connection