EDS-828 Series
24+4G-port layer 3 Gigabit modular managed Ethernet switch
 |
 Datasheet Manual |
 Larger image |
|
|
|
Features and Benefits
IntroductionThe EDS-828 is a high-performance Layer 3 switch designed for network routing, and the improved hardware technology built into the EDS-828 replaces the software logic used by traditional routers, offering better performance, and making the switch ideal for large-scale local area networks (LANs). In addition to Layer 3 features, the EDS-828 also supports Layer 2 management features, including QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON, IEEE 802.1X, HTTPS, and SSH. In order to meet the demands of any industrial application, the EDS-828 uses a modular design that allows users to install up to 4 Gigabit Ethernet ports and 24 fast Ethernet ports, providing a high degree of flexibility for network expansion. More info >> |
| • Technology: | |
| Standards | IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base FX, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACP |
| Protocols | IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, RIP V1/V2, HTTP, HTTPS, Telnet, SSH, Syslog |
| MIB | MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB,RMON MIB Group 1, 2, 3, 9 |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| • Switch Properties: | |
| Priority Queues | 4 |
| IGMP Groups | 256 |
| Max. Number of Available VLANs | 64 |
| VLAN ID Range | VID 1 to 4094 |
| • Interface: | |
| Fast Ethernet | 6 slots for any combination of 4-port Interface Module with 10/100BaseT(X) or 100BaseFX Click here for info on available modules. |
| Gigabit Ethernet | 2 slots for any combination of 2-port Interface Module with 10/100/1000BaseT(X), or 1000BaseSX/LX/LHX/ZX (SFP slot, LC connector) Click here for info on available modules. |
| Console | RS-232 (RJ45) |
| Alarm Contact | Two relay outputs with current carrying capacity of 1A@ 24 VDC |
| Digital Inputs | Two inputs with the same ground, but electrically isolated from the electronics • +13 to +30V for state “1” • -30 to +3V for state “0” • Max. input current: 8 mA |
| System LED Indicators | STAT, PWR1, PWR2, FAULT, MASTER, COUPLER, T.RING |
| Module LED Indicators | LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEED |
| • Power Requirements: | |
| Input Voltage | 24 VDC (12 to 45 VDC), redundant dual inputs |
| Input Current | 0.96A |
| Overload Current Protection | Present |
| Connection | Two removable 6-pin terminal blocks |
| Reverse Polarity Protection | Present |
| • Physical Characteristics: | |
| Housing | IP30 protection |
| Weight | 1950 g |
| Dimensions | 362.4 x 142.47 x 128 mm (14.27 x 5.61 x 5.04 in.) |
| Installation | DIN-Rail mounting, wall mounting (optional kit) |
| • Environmental Limits: | |
| Operating Temperature | 0 to 60°C (32 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Regulatory Approvals | |
| Safety | UL508 (Pending), UL60950-1, CSA C22.2 No. 60950-1, EN60950-1(Pending) |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 EN61000-4-12 |
| Hazardous Location | UL/cUL Class I, Division 2, Groups A, B, C, and D(Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
| MTBF | 160,000 hrs Database: Telcordia (Bellcore), GB |
| Maritime | DNV (Pending), GL (Pending) |
| • Warranty: | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
