Moxa Managed Switches EDS-726 Series - Industrial 26-Port Gigabit Ethernet Switch

EDS-726 Series－Quantities Limited

Next Step

Applications

Related Products

Quantities Limited

Features and Benefits

Introduction

Quantities Limited

Features and Benefits

Introduction

Moxa's popular EDS-726 switch will continue to be available for a limited time only. Why not upgrade to the EDS-728? It offers all the same features of the EDS-726, plus the following improvements:

The EDS-728 supports up to 4 Gigabit ports.
The EDS-728 supports both the original Turbo Ring and the new generation Turbo Ring.
The EDS-728 supports Moxa's convenient ABC-01 for saving and loading configurations (but no longer supports the CF card option).

Click here for more information on the EDS-728 >>

High Performance Network Switching Technology

Redundant Gigabit Ethernet Ring and RSTP/STP (IEEE802.1w/D)
IGMP Snooping and GMRP for filtering multicast traffic from industrial Ethernet Protocols
Port-based VLAN, IEEE802.1Q VLAN and GVRP protocol to ease network planning
QoS-IEEE802.1p/1Q and TOS/DiffServ to increase determinism
802.3ad, LACP for optimum bandwidth utilization
IEEE802.1X and https/SSL to enhance network security
SNMP V1/V2c/V3 for different levels of network management
RMON for efficient network monitoring and proactive capability

Designed for Industrial Applications

Five 1-port Gigabit modules, with 10/100/1000BaseT(X) (RJ45 connector), or 1000BaseSX/LX/LHX/ZX (SC connector)
Eight 4-port fast Ethernet Modules with a combination of 10/100BaseT(X) (RJ45 connectors) and 100BaseFX (Single/Multimode, SC/ST connectors)
Compact-flash card for upgrading firmware and loading or saving configurations
Bandwidth management prevents unpredictable network status
ABC-01 (Automatic Backup Configurator) for system configuration backup
Lock port for only authorized MAC address access
Port mirroring for online debugging
Automatic warning by exception through email, relay output
Digital inputs to integrate sensors and alarms with IP networks
Automatic recovery of connected device's IP addresses
Line-swap fast recovery (Patented)
Redundant, dual DC power inputs
IP30, rugged high-strength case
Long-haul transmit distance of 40 km or 80 km
DIN-Rail or panel mounting capability
Configurable by Web browser, Telnet/Serial console, Windows utility, CF card, and ABC-01
Send ping commands to identify network segment integrity

Recommended Software and Accessories

ABC-01 RS-232 RJ45-based Automatic Backup Configurator
EDS-SNMP OPC Server Pro
DR series DIN-Rail 24 VDC power supplies

With the EDS-726, network planning is easy and flexible. The modular design lets you install up to 2 Gigabit ports and 24 fast Ethernet ports. Choose from five 1-port Gigabit modules, with copper or fiber optic connectors, and eight 4-port Fast Ethernet modules with copper or fiber optic (SC/ST) connectors. EDS-726 meets the demands of any industrial application, and also leaves room for future expansion. EDS-726 is designed with the user in mind. Features include a tilted LED display for convenient viewing from any vertical angle, plug-able compact flash and ABC-01 (Automatic Backup Configurator) for configuration back-up, and redundant intelligent network management. EDS-726 provides more flexibility, reliability, and application-oriented functions to meet the demands of any harsh industrial application.

This product supports expansion modules. Click here for info on available modules.

More info >>

• Technology:
Standards	IEEE802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1W, 802.1Q, 802.1p, 802.1X, 802.3ad
Protocols	IGMP V1/V2/V3 device, GMRP, GVRP, SNMP V1/V2c/V3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, and RMON
MIB	MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control	IEEE802.3x flow control, back pressure flow control

• Interface:
Fast Ethernet	6 slots for any combination of 4-port Interface Module with 10/100BaseT(X) or 100BaseFX Click here for info on available modules.
Gigabit Ethernet	2 slots for any combination of 1-port Interface Module with 10/100/1000BaseT(X), 1000BaseSX/LX/LHX/ZX (SC connector) Click here for info on available modules.
Compact Flash Interface	8M memory size at least
Console	RS-232 (RJ45)
LED Indicators	System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLER, and CF Module LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEED
Alarm Contact	Two relay outputs with current carrying capacity of 1A @ 24 VDC
Digital Inputs	Two inputs with the same ground, but electrically isolated from the electronics For state "1": +13 to +30V For state "0": -30 to +3V Max. input current: 8 mA

• Power Requirements:
Input Voltage	24 VDC (12 to 45 VDC), redundant dual inputs
Power Consumption	EDS-72610G 21.5W IM-4TX 2.5W IM-2MSC/2TX 5W IM-2MST/2TX 5W IM-2SSC/2TX 5W IM-4MSC 7.2W IM-4MST 7.2W IM-4SSC 7.2W IM-1LSC/3TX 4W IM-1GTX 2.5W IM-1GSXSC 1.5W IM-1GLXSC 1.5W IM-1GLHXSC 1.5W IM-1GZXSC 1.5W
Overload Current Protection	Present
Connection	Two removable 6-pin terminal blocks
Reverse Polarity Protection	Present

• Physical Characteristics:
Enclosure	IP30 protection
Weight	1950 g
Dimensions	362 x 146 x 128 mm (W x H x D) 14.25 x 5.75 x 5.04 in. (W x H x D)
Installation	DIN-Rail, Wall Mounting (optional kit)

• Environmental Limits:
Operating Temperature	0 to 60°C (32 to 140°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5% to 95% (non-condensing)

• Regulatory Approvals
Safety	UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 (Pending)
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 EN61000-4-12
Hazardous Location	UL/cUL Class 1, Division 2, Groups A, B, C, and D (Pending) ATEX Class 1, Zone 2, EEx nC IIC (Pending)
Shock	IEC60068-2-27
Freefall	IEC60068-2-32
Vibration	IEC60068-2-6
Maritime	DNV, GL
MTBF (meantime between failures)	EDS-72610G: 210,000 hrs Database: MIL-HDBK-217F, GB 25°C

• Warranty:
Warranty Period	5 years
Details	See www.moxa.com/warranty

Back to Top

To request a quote, indicate which items you are interested in below and click "Get a Quote".

EDS Series Modules

	Model No.	Description
	EDS-72610G	This item no longer available
	EDS-72810G	(replacement for EDS-726) Modular switch system supporting up to 24+4G ports, 0 to 60°C

IM series

	Model No.	Description
	IM-4TX	Fast Ethernet interface module with 4 10/100BaseT(X) ports with RJ45 connectors, 0 to 60°C
	IM-2MSC/2TX	Fast Ethernet interface module with 2 multi-mode 100BaseFX ports with SC connectors, and 2 10/100BaseT(X) ports with RJ45 connectors, 0 to 60°C
	IM-2SSC/2TX	Fast Ethernet interface module with 2 single-mode 100BaseFX ports with SC connectors, and 2 10/100BaseT(X) ports with RJ45 connectors, 0 to 60°C
	IM-1LSC/3TX	Fast Ethernet interface module with 1 long-haul (80 km) single-mode 100BaseFX port with SC connector, and 3 10/100BaseT(X) ports with RJ45 connectors, 0 to 60°C
	IM-4MSC	Fast Ethernet interface module with 4 multi-mode 100BaseFX ports with SC connectors, 0 to 60°C
	IM-4MST	Fast Ethernet interface module with 4 multi-mode 100BaseFX ports with ST connectors, 0 to 60°C
	IM-2MST/2TX	Fast Ethernet interface module with 2 multi-mode 100BaseFX ports with ST connectors, and 2 10/100BaseT(X) ports with RJ45 connectors, 0 to 60°C
	IM-4SSC	Fast Ethernet interface module with 4 single-mode 100BaseFX ports with SC connectors, 0 to 60°C

Backup Configurators

	Model No.	Description
	ABC-01	Automatic Backup Configurator through the RS-232 console port, 0 to 60°C

Mounting Kits

	Model No.	Description
	RK-4U	4U-high 19” rack mounting kit
	WK-32	Wall mounting kit for EDS-700/800 series

DIN-Rail Power Supplies

Accessories - SNMP OPC Server Pro Software

	Model No.	Description
	EDS-SNMP OPC Server Pro	CD with EDS-SNMP OPC Server Pro Software and Manual

Description

45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input

75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input

120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switch