AWK-3121 series

Next Step

Related Products

Features and Benefits

Introduction

Features and Benefits

Introduction

IEEE 802.11a/b/g compliant
Power input by redundant 24 VDC power inputs or IEEE 802.3af-compliant Power-over-Ethernet
Powerful security with WEP/WPA/WPA2/IP packet filters
RS-232 console management
STP/RSTP support to increase reliability
DIN-Rail or wall mounting capability
IP30 protected high-strength metal housing
-40 to 75°C operating temperature range (-T model)

Are your industrial applications hard to wire, or are your wiring costs out of control? Are you already using mobile equipment that connects over an IP network? If so, then what you need is the AWK-3121 Access Point/Bridge/Client. The AWK-3121 is rated to operate at temperatures ranging from 0 to 60°C for standard models and -40 to 75°C for extended temperature models, and is rugged enough for any harsh industrial environment. Installation is easy, with either DIN-Rail mounting or distribution boxes. The DIN-Rail mounting capability, wide operating temperature range, and IP30 case with LED indicators make the AWK-3121 a convenient yet reliable solution for any industrial wireless application.

Advanced Security

64-bit and 128-bit WEP (Wired Equivalent Privacy)
Enable/disable SSID broadcasts
WPA/WPA2 (Wi-Fi Protected Access) support
IEEE802.1X/RADIUS support
Powerful IP packet filters

Useful Functions and Remote Configuration

Firmware upgrade from TFTP or HTTP
Console/web-based management
SNMP and STP/RSTP supported
Configuration backup and reset
Easy client deployment with DHCP

More info >>

• WLAN:
Standards	IEEE 802.11a/b/g for Wireless LAN IEEE 802.3u for 10/100BaseT(X) IEEE 802.3af for Power-over-Ethernet IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP
Data Rate & Modulation	802.11b: DBPSK, DQPSK, CCK 802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM 802.11a: OFDM with BPSK, QPSK, 16QAM, 64QAM OFDM @ 54 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBSK @ 1 Mbps
Operating Channels	US: 2.412 to 2.462 GHz (11 channels) 5.15 to 5.25 GHz (4 channels) EU: 2.412 to 2.472 GHz (13 channels) 5.15 to 5.25 GHz (4 channels) JP: 2.412 to 2.472 GHz (13 channels, OFDM) 2.412 to 2.484 GHz (14 channels, CCK) 5.15 to 5.25 GHz (4 channels for W52)
Security	64-bit and 128-bit WEP and WPA/WPA2 (TKIP, AES and IEEE802.1X, EAP-TLS/TTLS/PEAP, EAP-PAP/CHAP/MSCHAP/MSCHAPv2)
Data Rates	802.11b: 1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps 802.11a/g: 6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, 54 Mbps
Transmit Power	802.11b: 1 to 11 Mbps: Typ. 18 dBm (+/- 1.5 dBm) 802.11g: 6 to 24 Mbps: Typ. 18 dBm (+/- 1.5 dBm); 36 to 48 Mbps: Typ. 16 dBm (+/- 1.5 dBm); 54 Mbps: Typ. 15 dBm (+/- 1.5 dBm) 802.11a: 6 to 24 Mbps: Typ. 16 dBm (+/- 1.5 dBm); 36 to 48 Mbps: Typ. 14 dBm (+/- 1.5 dBm); 54 Mbps: Typ. 13dBm (+/- 1.5 dBm)
RX Sensitivity	802.11b:-92 dBm @ 1 Mbps; -90 dBm @ 2 Mbps; -88 dBm @ 5.5 Mbps; -84 dBm @ 11 Mbps 802.11g:-87 dBm @ 6 Mbps; -86 dBm @ 9 Mbps; -85 dBm @ 12 Mbps; -82 dBm @ 18 Mbps; -80 dBm @ 24 Mbps; -76 dBm @ 36 Mbps; -72 dBm @ 48 Mbps; -70 dBm @ 54 Mbps 802.11a:-87 dBm @ 6 Mbps; -86 dBm @ 9 Mbps; -85 dBm @ 12 Mbps; -82 dBm @ 18 Mbps; -80 dBm @ 24 Mbps; -76 dBm @ 36 Mbps; -72 dBm @ 48 Mbps; -70 dBm @ 54 Mbps

• Interface:
Antenna	2 dBi dual-band, omni-directional antenna
RJ45 Ports	10/100BaseT(X) auto negotiation speed
Console	RS-232 (RJ45)
LED Indicators	PWR1, PWR2, PoE, FAULT, STATE, signal strength, CLIENT MODE, BRIDGE MODE, WLAN, 10M, 100M
Alarm Contact	1 relay output with current carrying capacity of 1A @ 24 VDC
Digital Inputs	2 electrically-isolated inputs ‧0 to 3.3V for state "0" (OFF) ‧10 to 48V for state “1” (ON) ‧Max. input current: 8 mA
Connector(s)	RP-SMA (female)

• Power Requirements:
Input Voltage	-12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant)
Connection	10-pin removable terminal block
Reverse Polarity Protection	Present

• Physical Characteristics:
Housing	IP30 protection, metal case
Weight	850 g
Dimensions	W x H x D: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Installation	DIN-Rail mounting, wall mounting (optional kit)

• Environmental Limits:
Operating Temperature	0 to 60°C (32 to 140°F), -40 to 75°C (-40 to 167°F ) for -T models
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5% to 95% (non-condensing)

• Regulatory Approvals
Safety	EN60950-1, UL60950-1
EMI	FCC Part 15
Radio	EN300 328, EN301 893, EN301 489-1/-17, ARIB STD-33/66 /T71 (Japan)

• Warranty:
Warranty Period	5 years
Details	See www.moxa.com/warranty

Back to Top

To request a quote, indicate which items you are interested in below and click "Get a Quote".

IEEE 802.11a/b/g 2.4 & 5 GHz Dual-band Antenna

	Model No.	Description
	ANT-WDB-O-2	2.4-2.5 GHz & 4.9-5.8 GHz, RP-SMA male connector

IEEE 802.11b/g 2.4 GHz Antennas

Available Models

	Model No.	Description
	AWK-3121-US	IEEE 802.11a/b/g wireless AP/Bridge/Client, US band, 0 to 60°C
	AWK-3121-EU	IEEE 802.11a/b/g wireless AP/Bridge/Client, EU band, 0 to 60°C
	AWK-3121-JP	IEEE 802.11a/b/g wireless AP/Bridge/Client, JP band, 0 to 60°C
	AWK-3121-US-T	IEEE 802.11a/b/g wireless AP/Bridge/Client, US band, -40 to 75°C
	AWK-3121-EU-T	IEEE 802.11a/b/g wireless AP/Bridge/Client, EU band, -40 to 75°C
	AWK-3121-JP-T	IEEE 802.11a/b/g wireless AP/Bridge/Client, JP band, -40 to 75°C

Accessories

Description

ANT-WSB-O-5-150

2.4-2.5 GHz, 1/4λ Dipole Sleeve, 5 dBi, RP-SMA male connector

ANT-1-O-09

2.4-2.5 GHz, omni-directional, 9 dBi, N-type (female) connector

ANT-1-D-12

2.4-2.5 GHz, directional / Flat Panel, 12 dBi, N-type (female) connector

ANT-WSB-O-02

2.4-2.5 GHz, 1/4λ Dipole Sleeve, 2 dBi, RP-SMA male connector